How to Make a Table Lamp

One way to really make decorating your home unique and with your style is to make your own pieces. One of the most interesting pieces for you to make with your own hands is a beautiful lamp. Next we selected some very easy tutorials on how to make lampshade and also how to decorate a lamp already ready.

Get your hands on and be sure to ensure a style that’s all special to your home with parts made by yourself. Decorate your home with all your style, it is much easier than it looks.

How to Make a Table Lamp

Necessary materials

  • Lampshade
  • Vinyl glue
  • Tissue paper
  • Brush
  • Acrylics: ocher, copper and gold

And here we leave the video so that you can better see how to make a table lamp: internetages.com.

How to make

Step 1

To begin you place the sheets of tissue paper on top of the lamp. Using a paintbrush you pass the vinyl glue on the paper. The paper should adhere to the shade, the formation of wrinkles on the paper is expected and desired. Continue the tutorial by pasting the sheets of tissue paper over the piece, do this until you completely cover the lamp. Wait until it dries.

Step 2

In this step you must pass over the acrylic piece in ocher color, so that it gives the expected result it is necessary to dilute the paint in water. Wait until the ink dries.

Step 3

To make the finishing effect of the piece you must brush the surface as a whole with the ocher paint, do not forget that it should be well diluted in water. Pay special attention to the reliefs that are created by the wrinkles of the paper. Leave the piece even brighter by giving looser strokes with the golden acrylic and it’s ready.

Paper Shade Tutorial

Necessary materials

  • Tape measure
  • Scissors
  • Wallpaper
  • Ruler
  • Soft pencil
  • A lamp that is smooth and in a slightly tapered shape.
  • Soft Rubber Rubber 2.5 cm wide
  • Paper Clips
  • Polyvinylpyrrolidone or hot glue gun
  • Paper clips, pins and cutouts

How to make

Step 1

The first step is to measure the height of the lamp on its sloping side using the measuring tape, add another 2 cm by that time so that it can be finished. You should also measure the circumference of the lower edge of the lamp. The diameter result should be multiplied by 2.5. Once you have the measurements in hand you should cut the wallpaper so that it is possible to cover your lamp.

Step 2

In this step you should mark the back of the paper using pencils. Draw a parallel line along the edge that is at a distance of 2.5 cm from it. After that, a series of folding lines should be marked with a space of 4 cm between one and the other.

Step 3

Then turn the paper with the side of the verse up and with your fingers together make a fold by the line of the fold. After that you should turn the paper to the straight side so that the fold lines that are side by side match, then fold again to form accordion pleats that are about 2 cm.

Step 4

In this step we will assemble the folds that are at the short ends of the strip that has been folded so that it is possible to form a circle. The excess paper should be trimmed, then divide the paper circle into four folded pieces. Trim excess paper also at the edges of the top of the lamp. With the clips make a circle according to the lines that were drawn with the pencil.

Step 5

Then form a bunch of folded paper that will tighten, fasten again using strips of paper and with the help of a string. The use of paper is important to prevent the cord from ticking. It will be necessary to leave the paper rested like this for several hours so that it is possible that the folds are well folded.

Step 6

After waiting a long time you should remove the string and the paper. Then mount the short ends of the wallpaper that was folded and paste using the stickers. Wait for it to dry for a few hours.

Step 7

Adjust the folded paper base over the lamp, align it with the help of the clips and using the pencil lists. Put two elastics on the top and bottom of the lamp. Then adjust the folds so that they can protrude from the lamp about 1.5 cm.

Step 8

After that you should glue the folded wallpaper over the lamp to its top and bottom edges. Use hot glue to make sure it is secure.

Tutorial To Renew The Visual Of The Lamp

Necessary materials

  • Fabric(to line the dome of the lamp)
  • Iron
  • Hot glue or spray glue
  • Scissors

How to make

Step 1

Take the measurement from the dome of your lamp to find out more or less how much tissue is needed.

Step 2

Carefully remove the dome from the lamp and clean the base. Then stretch the fabric well on a surface that is flat and exactly in the middle, tip with tip. The dome should be placed on this folded cloth, remove the measurement. After that it is only cut using symmetry the correct measurement to make the lining of the dome.

Step 3

Create a crease about 2 cm in the top and bottom of the fabric. Do not forget to leave a piece to pass the hot glue. To avoid creases, iron over the fabric.

Step 4

In order for your hair to look good, it is important to take care that the fabric is smooth. In a place that is aerated pass the spray glue on the dome, then just wrap the fabric around the piece. Finish bypassing the dome with the fabric and glue the tips with the hot glue to make sure it is secure. To give an even more personal touch place other embellishments on the piece.

Leave a Comment

Filed under Lights

Leave a Reply